Supra MKIV Build Series

Project Send It: Part 12 - Real World Testing
With the alignment done and running out of time, I had to get the Supra back on the dyno. And quickly get everything engine related on the Syvecs setup and...
Project Send It: Part 12 - Real World Testing
With the alignment done and running out of time, I had to get the Supra back on the dyno. And quickly get everything engine related on the Syvecs setup and...

Project Send It: Part 11 - Post Dyno Changes + ...
Dyno Lessons and Setup Progress The dyno taught me a few things about the setup and highlighted areas that need work. Since the first real-world tests will all be straight-line...
Project Send It: Part 11 - Post Dyno Changes + ...
Dyno Lessons and Setup Progress The dyno taught me a few things about the setup and highlighted areas that need work. Since the first real-world tests will all be straight-line...

Project Send It: Part 10 - First Start, Initial...
So that night it was crunch time. Continued setting up all the electronics and CANBUS communications. You know its getting serious when both laptops are on duty. The list of...
Project Send It: Part 10 - First Start, Initial...
So that night it was crunch time. Continued setting up all the electronics and CANBUS communications. You know its getting serious when both laptops are on duty. The list of...

Project Send It: Part 9 - Wiring
Back into the engine bay: - Mounted racegrade EGT on chassis rail- Installed all 7 lambda sensors- Ran vacuum lines- Made some hardlines for oil- Coolant hardlines for electronic gate...
Project Send It: Part 9 - Wiring
Back into the engine bay: - Mounted racegrade EGT on chassis rail- Installed all 7 lambda sensors- Ran vacuum lines- Made some hardlines for oil- Coolant hardlines for electronic gate...

Project Send It: Part 8 - Fabrication & Fuel
Hi again, been another minute since an update but its all starting to come together now. I have done an awful job of keeping up to date with photos, but...
Project Send It: Part 8 - Fabrication & Fuel
Hi again, been another minute since an update but its all starting to come together now. I have done an awful job of keeping up to date with photos, but...

Project Send It: Part 7 - Final Install
Got another set of TC105N's in 8.5'' to suit the stock front wings slightly better, with some AR1's in 245/40/18. My other TC105N's were 9.5'' and with 265 tyres were...
Project Send It: Part 7 - Final Install
Got another set of TC105N's in 8.5'' to suit the stock front wings slightly better, with some AR1's in 245/40/18. My other TC105N's were 9.5'' and with 265 tyres were...